Filtrar :
Norma o proyecto bajo la responsabilidad directa de ISO/TC 44/SC 5 Secretaría Etapa ICS
Recommended practice for radiographic examination of fusion welded joints — Part 1: Fusion welded butt joints in steel plates up to 50 mm thick
95.99
Recommended practice for radiographic examination of fusion welded joints — Part 2: Fusion welded butt joints in steel plates thicker than 50 mm and up to and including 200 mm in thickness
95.99
Recommended practice for radiographic examination of fusion welded joints — Part 3: Fusion welded circumferential joints in steel pipes of up to 50 mm wall thickness
95.99
Recommended practice for the X-ray inspection of fusion welded butt joints for aluminium and its alloys and magnesium and its alloys 5 to 50 mm thick
95.99
Radiography of welds and viewing conditions for films — Utilization of recommended patterns of image quality indicators (I.Q.I.)
95.99
Fusion-welded butt joints in steel — Transverse tensile test
95.99
Destructive tests on welds in metallic materials — Transverse tensile test
95.99
Destructive tests on welds in metallic materials — Transverse tensile test
95.99
Destructive tests on welds in metallic materials — Transverse tensile test
60.60
Non-destructive testing of welds — Phased array ultrasonic testing (UT-PA) for thin-walled steel components — Acceptance levels
60.60
Destructive tests on welds in metallic materials — Bend tests
95.99
Destructive tests on welds in metallic materials — Bend tests
95.99
Destructive tests on welds in metallic materials — Bend tests — Amendment 1
95.99
Destructive tests on welds in metallic materials — Bend tests
60.60
Destructive tests on welds in metallic materials — Longitudinal tensile test on weld metal in fusion welded joints
95.99
Destructive tests on welds in metallic materials — Longitudinal tensile test on weld metal in fusion welded joints
90.93
Spot welding equipment — Taper plug gauges and taper ring gauges
95.99
Welds in steel — Calibration block No. 2 for ultrasonic examination of welds
95.99
Destructive tests on welds in metallic materials — Hardness testing — Part 1: Hardness test on arc welded joints
90.93
Destructive tests on welds in metallic materials — Hardness testing — Part 2: Microhardness testing of welded joints
95.99
Destructive tests on welds in metallic materials — Hardness testing — Part 2: Microhardness testing of welded joints
90.93
Destructive tests on welds in metallic materials — Impact tests — Test specimen location, notch orientation and examination
95.99
Destructive tests on welds in metallic materials — Impact tests — Test specimen location, notch orientation and examination
95.99
Destructive tests on welds in metallic materials — Impact tests — Test specimen location, notch orientation and examination
60.60
Destructive tests on welds in metallic materials — Fracture test
95.99
Destructive tests on welds in metallic materials — Fracture test
90.93
Destructive tests on welds in metallic materials — Tensile test on cruciform and lapped joints
95.99
Destructive tests on welds in metallic materials — Tensile test on cruciform and lapped joints
90.93
Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 1: Steel, nickel, titanium and their alloys
95.99
Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 1: Steel, nickel, titanium and their alloys
95.99
Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 1: Steel, nickel, titanium and their alloys
60.60
Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 2: Aluminium and its alloys
95.99
Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 2: Aluminium and its alloys
95.99
Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 2: Aluminium and its alloys
60.60
Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique (TOFD)
95.99
Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique (TOFD)
60.60
Non-destructive testing of welds — Ultrasonic testing — Acceptance levels
95.99
Non-destructive testing of welds — Ultrasonic testing — Acceptance levels
90.93
Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology
95.99
Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology
90.93
Non-destructive testing of welds — Time-of-flight diffraction technique (TOFD) — Acceptance levels
95.99
Non-destructive testing of welds — Time-of-flight diffraction technique (TOFD) — Acceptance levels
90.93
Destructive tests on welds in metallic materials — Etchants for macroscopic and microscopic examination
90.93
Non-destructive testing — Ultrasonic testing — Technique of testing claddings produced by welding, rolling and explosion
95.99
Non-destructive testing — Ultrasonic testing — Technique of testing claddings produced by welding, rolling and explosion
60.60
Non-destructive testing of welds — General rules for fusion welds in metallic materials
95.99
Non-destructive testing of welds — General rules for metallic materials
95.99
Non-destructive testing of welds — General rules for metallic materials
90.92
Non-destructive testing of welds — General rules for metallic materials
50.00
Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film
95.99
Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film
60.60
Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors
95.99
Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors
60.60
Non-destructive testing of welds — Radiographic testing of fusion-welded joints
95.99
Non-destructive testing of welds — Visual testing of fusion-welded joints
95.99
Non-destructive testing of welds — Visual testing of fusion-welded joints
90.93
Non-destructive testing of welds — Magnetic particle testing
95.99
Non-destructive testing of welds — Magnetic particle testing
90.93
Destructive tests on welds in metallic materials — Macroscopic and microscopic examination of welds
95.99
Destructive tests on welds in metallic materials — Macroscopic and microscopic examination of welds
60.60
Non-destructive testing of welds — Ultrasonic testing of welded joints
95.99
Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment
95.99
Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment
95.99
Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment
90.93
Destructive tests on welds in metallic materials — Hot cracking tests for weldments — Arc welding processes — Part 1: General
90.60
Destructive tests on welds in metallic materials — Hot cracking tests for weldments — Arc welding processes — Part 2: Self-restraint tests
95.99
Destructive tests on welds in metallic materials — Hot cracking tests for weldments — Arc welding processes — Part 2: Self-restraint tests
90.93
Destructive tests on welds in metallic materials — Hot cracking tests for weldments — Arc welding processes — Part 3: Externally loaded tests
90.93
Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 1: General
90.60
Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 2: Self-restraint tests
90.60
Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 3: Externally loaded tests
90.60
Non-destructive testing of welds — Eddy current testing of welds by complex-plane analysis
95.99
Non-destructive testing of welds — Eddy current testing of welds by complex-plane analysis
90.93
Non-destructive testing of welds — Phased array ultrasonic testing (PAUT) — Acceptance levels
90.93
Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology for thin-walled steel components
90.93
Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys
95.99
Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys
95.99
Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys
90.93
Destructive tests on welds in metallic materials — Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
90.20
Non-destructive testing of welds — Penetrant testing of welds — Acceptance levels
95.99
Non-destructive testing of welds — Penetrant testing — Acceptance levels
90.93
Non-destructive testing of welds — Magnetic particle testing of welds — Acceptance levels
95.99
Non-destructive testing of welds — Magnetic particle testing — Acceptance levels
90.93
Non-destructive testing of welds — Ultrasonic testing — Characterization of indications in welds
95.99
Non-destructive testing of welds — Ultrasonic testing — Characterization of indications in welds
95.99
Non-destructive testing of welds — Ultrasonic testing — Characterization of discontinuities in welds
90.93

No se ha encontrado ningún registro que coincida. Pruebe a cambiar los ajustes de filtro.