Résumé
PreviewISO 18549-2:2009 describes two methods for the determination of the time (flow rate) it takes for a given quantity of a heated powder mix, based on iron or steel powders and to be used for warm compaction, to pass through a funnel with a given orifice diameter.
Method A uses a funnel with an orifice of 2,5 mm and a test portion of 50 g and is, to a large extent, based on the method standardized in ISO 4490:2008. The method can only be used for powder mixes that flow freely through the 2,5 mm orifice in the heated condition.
Method B uses a funnel with an orifice of 5 mm and a test portion with a size of 150 g.
Both methods cover a testing temperature range of 60 °C to 180 °C and either of them can be selected after agreement between the parties involved.
-
État actuel: PubliéeDate de publication: 2009-04
-
Edition: 1
-
Comité technique: ISO/TC 119/SC 2 Échantillonnage et méthodes d'essais des poudres (y compris les poudres pour métaux-durs)
-
- ICS :
- 77.160 Métallurgie des poudres
Acheter cette norme
| Format | Langue | |
|---|---|---|
| std 1 40 | ||
| std 2 40 | Papier |
- CHF40
Cycle de vie
Vous avez une question?
Consulter notre FAQ
Horaires d’ouverture:
De lundi à vendredi - 09:00-12:00, 14:00-17:00 (UTC+1)
Suivez l'actualité de l'ISO
Inscrivez-vous à notre Newsletter (en anglais) pour suivre nos actualités, points de vue et informations sur nos produits.