Filter :
| Standard and/or project(0) | Stage | TC |
|---|---|---|
|
Welded or seamless steel tubes for water, sewage and gas
|
95.99 | ISO/TC 5 |
|
Steel tubes for water and sewage
|
95.99 | ISO/TC 5/SC 1 |
|
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 1: General
|
90.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 2: Pipes
|
90.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 3: Fittings
|
90.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 4: Valves
|
90.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 5: Fitness for purpose of the system
|
90.60 | ISO/TC 138/SC 2 |
|
Ductile iron pipes, fittings, accessories and their joints for water or gas applications
|
95.99 | ISO/TC 5/SC 2 |
|
Ductile iron pipes, fittings, accessories and their joints for water applications
|
90.93 | ISO/TC 5/SC 2 |
|
Ductile iron pipes, fittings, accessories and their joints for water applications — Technical Corrigendum 1
|
60.60 | ISO/TC 5/SC 2 |
|
Unplasticized polyvinyl chloride (PVC) pipes for potable water supply — Extractability of lead and tin — Test method
|
90.93 | ISO/TC 138/SC 5 |
|
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 1: Method of measurement
|
95.99 | ISO/TC 43/SC 2 |
|
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 1: Method of measurement
|
90.93 | ISO/TC 43/SC 2 |
|
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 1: Method of measurement — Amendment 1: Measurement uncertainty
|
60.60 | ISO/TC 43/SC 2 |
|
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 2: Mounting and operating conditions for draw-off taps
|
95.99 | ISO/TC 43/SC 2 |
|
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 2: Mounting and operating conditions for draw-off taps and mixing valves
|
90.93 | ISO/TC 43/SC 2 |
|
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 3: Mounting and operating conditions for in-line valves and appliances
|
95.99 | ISO/TC 43/SC 2 |
|
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 3: Mounting and operating conditions for in-line valves and appliances
|
95.99 | ISO/TC 43/SC 2 |
|
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 3: Mounting and operating conditions for in-line valves and appliances — Amendment 1
|
95.99 | ISO/TC 43/SC 2 |
|
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 3: Mounting and operating conditions for in-line valves and appliances
|
90.60 | ISO/TC 43/SC 2 |
|
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 4: Mounting and operating conditions for special appliances
|
95.99 | ISO/TC 43/SC 2 |
|
Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations — Part 4: Mounting and operating conditions for special appliances
|
90.93 | ISO/TC 43/SC 2 |
|
Measurement of water flow in closed conduits — Meters for cold potable water — Part 1: Specification
|
95.99 | ISO/TC 30 |
|
Measurement of water flow in closed conduits — Meters for cold potable water — Part 1: Specifications
|
95.99 | ISO/TC 30/SC 7 |
|
Measurement of water flow in fully charged closed conduits — Meters for cold potable water and hot water — Part 1: Specifications
|
95.99 | ISO/TC 30/SC 7 |
|
Water meters for cold potable water and hot water — Part 1: Metrological and technical requirements
|
95.99 | ISO/TC 30/SC 7 |
|
Water meters for cold potable water and hot water — Part 1: Metrological and technical requirements
|
60.60 | ISO/TC 30/SC 7 |
|
Measurement of water flow in closed conduits — Meters for cold potable water — Part 2: Installation requirements
|
95.99 | ISO/TC 30/SC 7 |
|
Measurement of water flow in closed conduits — Meters for cold potable water — Part 2: Installation requirements — Addendum 1: Parallel and multiple meter operation
|
95.99 | ISO/TC 30 |
|
Measurement of water flow in closed conduits — Meters for cold potable water — Part 2: Installation requirements and selection
|
95.99 | ISO/TC 30/SC 7 |
|
Measurement of water flow in fully charged closed conduits — Meters for cold potable water and hot water — Part 2: Installation requirements
|
95.99 | ISO/TC 30/SC 7 |
|
Water meters for cold potable water and hot water — Part 2: Test methods
|
95.99 | ISO/TC 30/SC 7 |
|
Water meters for cold potable water and hot water — Part 2: Test methods
|
60.60 | ISO/TC 30/SC 7 |
|
Measurement of water flow in closed conduits — Meters for cold potable water — Part 3: Test methods and equipment
|
95.99 | ISO/TC 30/SC 7 |
|
Measurement of water flow in closed conduits — Meters for cold potable water — Part 3: Test methods and equipment
|
95.99 | ISO/TC 30/SC 7 |
|
Measurement of water flow in fully charged closed conduits — Meters for cold potable water and hot water — Part 3: Test methods and equipment
|
95.99 | ISO/TC 30/SC 7 |
|
Water meters for cold potable water and hot water — Part 3: Test report format
|
95.99 | ISO/TC 30/SC 7 |
|
Water meters for cold potable water and hot water — Part 3: Test report format
|
60.60 | ISO/TC 30/SC 7 |
|
Water meters for cold potable water and hot water — Part 4: Non-metrological requirements not covered in ISO 4064-1
|
95.99 | ISO/TC 30/SC 7 |
|
Water meters for cold potable water and hot water — Part 4: Non-metrological requirements not covered in ISO 4064-1
|
60.60 | ISO/TC 30/SC 7 |
|
Water meters for cold potable water and hot water — Part 5: Installation requirements
|
90.92 | ISO/TC 30/SC 7 |
|
Water meters for cold potable water and hot water — Part 5: Installation requirements
|
50.00 | ISO/TC 30/SC 7 |
|
Unplasticized polyvinyl chloride (PVC-U) pipes for water supply — Recommended practice for laying
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for water supply — Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) — Guidance for installation
|
90.93 | ISO/TC 138/SC 2 |
|
Water aggressiveness evaluation and optimized lining choice
|
60.60 | ISO/TC 5/SC 2 |
|
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 1: General
|
95.99 | ISO/TC 138/SC 2 |
|
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 2: Pipes (with or without integral sockets)
|
95.99 | ISO/TC 138/SC 2 |
|
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 3: Fittings and joints
|
95.99 | ISO/TC 138/SC 2 |
|
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 4: Valves and ancillary equipment
|
95.99 | ISO/TC 138/SC 2 |
|
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 5: Fitness for purpose of the system
|
95.99 | ISO/TC 138/SC 2 |
|
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications
|
95.99 | ISO/TC 138/SC 2 |
|
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Amendment 1
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General — Amendment 1: Melt mass-flow rate (MFR) for PE 80 and PE 100
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General — Technical Corrigendum 1
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for water supply and for drainage and sewerage under pressure — Polyethylene (PE) — Part 1: General
|
90.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2: Pipes
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2: Pipes — Amendment 1
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 2: Pipes
|
90.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 2: Pipes — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 3: Fittings
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 3: Fittings
|
90.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 5: Fitness for purpose of the system
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 5: Fitness for purpose of the system
|
90.60 | ISO/TC 138/SC 2 |
|
Polyethylene (PE) pipes for water supply — Specifications
|
95.99 | ISO/TC 138/SC 2 |
|
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
|
95.99 | ISO/TC 45/SC 4 |
|
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
|
95.99 | ISO/TC 45/SC 4 |
|
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
|
95.99 | ISO/TC 45/SC 4 |
|
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
|
95.99 | ISO/TC 45/SC 4 |
|
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
|
60.60 | ISO/TC 45/SC 4 |
|
Ductile iron pipes — Centrifugal cement mortar lining — Composition controls of freshly applied mortar
|
95.99 | ISO/TC 5/SC 2 |
|
Unplasticized polyvinyl chloride (PVC-U) pipes for drinking water supply — Extractability of cadmium and mercury occurring as impurities
|
95.99 | ISO/TC 138/SC 5 |
|
Predominantly key-operated cast iron gate valves for underground use
|
95.99 | ISO/TC 153 |
|
Measurement of water flow in closed conduits — Meters for cold potable water — Combination meters — Part 1: Specifications
|
95.99 | ISO/TC 30 |
|
Measurement of water flow in closed conduits — Combination meters for cold potable water — Part 1: Specifications
|
95.99 | ISO/TC 30/SC 7 |
|
Measurement of water flow in closed conduits — Meters for cold potable water — Combination meters — Part 2: Installation requirements
|
95.99 | ISO/TC 30 |
|
Measurement of water flow in closed conduits — Combination meters for cold potable water — Part 2: Installation requirements
|
95.99 | ISO/TC 30/SC 7 |
|
Measurement of water flow in closed conduits — Meters for cold potable water — Combination meters — Part 3: Test methods
|
95.99 | ISO/TC 30/SC 7 |
|
Plastics pipes for the transport of water intended for human consumption — Extractability of constituents — Test method
|
95.99 | ISO/TC 138/SC 5 |
|
Plastics piping systems for the conveyance of water intended for human consumption — Migration assessment — Determination of migration values for plastics pipes
|
95.99 | ISO/TC 138/SC 5 |
|
Plastics piping systems for the transport of water intended for human consumption — Migration assessment — Determination of migration values of plastics pipes and fittings and their joints
|
90.93 | ISO/TC 138/SC 5 |
|
Rubber seals — Joint rings for hot water supply pipelines up to 110 degrees C — Specification for the material
|
95.99 | ISO/TC 45/SC 4 |
|
Ductile iron pipelines — Rubber sealing rings for pipelines carrying potable water
|
95.99 | ISO/TC 5/SC 2 |
|
Measurement of water flow in closed conduits — Meters for hot water — Part 1: Specifications
|
95.99 | ISO/TC 30/SC 7 |
|
Thermoplastics pipes and fittings for hot and cold water systems
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Guidance for classification and design
|
90.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Guidance for classification and design — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for pressure and non-pressure water supply — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
|
95.99 | ISO/TC 138/SC 6 |
|
Plastics piping systems for pressure and non-pressure water supply — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Amendment 1
|
95.99 | ISO/TC 138/SC 6 |
|
Plastics piping systems for pressure and non-pressure water supply — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
|
95.99 | ISO/TC 138/SC 6 |
|
Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply — Quality requirements and testing
|
95.99 | ISO/TC 107 |
|
Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply — Quality requirements and testing
|
90.92 | ISO/TC 107 |
|
Plastics piping systems for water supply and drainage and sewerage under pressure – modified poly(vinyl chloride)(PVC-M) pipe
|
40.00 | ISO/TC 138/SC 2 |
|
Plastics piping systems — Pressure systems for hot and cold water — Test method for leaktightness under vacuum
|
90.93 | ISO/TC 138/SC 5 |
|
Plastics piping systems — Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes — Test method for leaktightness under negative pressure
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes — Test method for leaktightness under negative pressure, angular deflection and deformation
|
95.99 | ISO/TC 138/SC 5 |
|
Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes — Test method for leaktightness under internal pressure and with angular deflection
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes — Test method for leaktightness under internal pressure and with angular deflection
|
90.93 | ISO/TC 138/SC 5 |
|
Plastics pipes and fittings — Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General — Amendment 1
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General
|
90.93 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General — Amendment 1: Impact test
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes — Amendment 1
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes
|
90.93 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes — Amendment 2: Impact test
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings
|
90.93 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings — Amendment 2
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5: Fitness for purpose of the system
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5: Fitness for purpose of the system
|
90.93 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5: Fitness for purpose of the system — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 7: Guidance for the assessment of conformity
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 7: Guidance for the assessment of conformity
|
90.93 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 1: General
|
90.92 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 1: General — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 1: General
|
40.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes
|
90.92 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes — Amendment 2
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes
|
40.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings
|
90.92 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings — Amendment 2
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings
|
40.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system
|
90.92 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system — Technical Corrigendum 1
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system
|
40.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 7: Guidance for the assessment of conformity
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 7: Guidance for the assessment of conformity
|
90.93 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 1: General
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 1: General — Amendment 1
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 1: General
|
90.93 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 2: Pipes
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 2: Pipes — Amendment 1
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 2: Pipes
|
90.93 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 2: Pipes — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 3: Fittings
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings
|
90.93 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings — Amendment 2
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 5: Fitness for purpose of the system
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 5: Fitness for purpose of the system
|
90.93 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 5: Fitness for purpose of the system — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 7: Guidance for the assessment of conformity
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 7: Guidance for the assessment of conformity
|
90.93 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 1: General
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 1: General
|
90.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 1: General — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes
|
90.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes — Amendment 2
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings
|
90.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings — Amendment 2
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 5: Fitness for purpose of the system
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 5: Fitness for purpose of the system
|
90.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 5: Fitness for purpose of the system — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 5: Fitness for purpose of the system — Amendment 2
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 7: Guidance for the assessment of conformity
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 7: Guidance for the assessment of conformity
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 7: Guidance for the assessment of conformity
|
90.93 | ISO/TC 138/SC 2 |
|
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Part 1: General
|
60.60 | ISO/TC 138/SC 2 |
|
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Part 2: Pipes
|
60.60 | ISO/TC 138/SC 2 |
|
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Part 3: Fittings
|
60.60 | ISO/TC 138/SC 2 |
|
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Part 5: Fitness for purpose of the system
|
60.60 | ISO/TC 138/SC 2 |
|
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications
|
95.99 | ISO/TC 138/SC 2 |
|
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications
|
95.99 | ISO/TC 138/SC 2 |
|
Ductile iron pipes, fittings, accessories and their joints compatible with plastic (PVC or PE) piping systems, for water applications and for plastic pipeline connections, repair and replacement
|
90.93 | ISO/TC 5/SC 2 |
|
Multilayer piping systems for hot and cold water installations inside buildings — Part 1: General
|
90.93 | ISO/TC 138/SC 2 |
|
Multilayer piping systems for hot and cold water installations inside buildings — Part 2: Pipes
|
90.93 | ISO/TC 138/SC 2 |
|
Multilayer piping systems for hot and cold water installations inside buildings — Part 2: Pipes — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
|
Multilayer piping systems for hot and cold water installations inside buildings — Part 3: Fittings
|
90.93 | ISO/TC 138/SC 2 |
|
Multilayer piping systems for hot and cold water installations inside buildings — Part 3: Fittings — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
|
Multilayer piping systems for hot and cold water installations inside buildings — Part 5: Fitness for purpose of the system
|
90.93 | ISO/TC 138/SC 2 |
|
Multilayer piping systems for hot and cold water installations inside buildings — Part 7: Guidance for the assessment of conformity
|
95.99 | ISO/TC 138/SC 2 |
|
Multilayer piping systems for hot and cold water installations inside buildings — Part 7: Guidance for the assessment of conformity — Amendment 1
|
95.99 | ISO/TC 138/SC 2 |
|
Multilayer piping systems for hot and cold water installations inside buildings — Part 7: Guidance for the assessment of conformity
|
90.93 | ISO/TC 138/SC 2 |
|
Life cycle analysis and recycling of ductile iron pipes for water applications
|
90.60 | ISO/TC 5/SC 2 |
|
Input/output protocols and electronic interfaces for water meters — Requirements
|
90.93 | ISO/TC 30/SC 7 |
|
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 1: General
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 1: General
|
90.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 2: Pipes
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 2: Pipes
|
90.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 2: Pipes — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings
|
90.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings — Amendment 2
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 5: Fitness for purpose of the system
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 5: Fitness for purpose of the system
|
90.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 5: Fitness for purpose of the system — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 7: Guidance for the assessment of conformity
|
95.99 | ISO/TC 138/SC 2 |
|
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 7: Guidance for the assessment of conformity
|
90.93 | ISO/TC 138/SC 2 |
|
Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers
|
95.99 | ISO/TC 45/SC 4 |
|
Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers
|
60.60 | ISO/TC 45/SC 4 |
|
Service activities relating to drinking water supply systems and wastewater systems — Crisis management — Good practice for technical aspects
|
90.93 | ISO/TC 224 |
|
Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Pipes with flexible joints intended to be installed using jacking techniques
|
90.92 | ISO/TC 138/SC 6 |
|
Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes
|
90.93 | ISO/TC 138/SC 2 |
No matching records found. Please try changing the filter settings.