Фильтр :
Стандарт и/или проект находящийся в компетенции ISO/TC 44/SC 5 Секретариата | Этап | ICS |
---|---|---|
Recommended practice for radiographic examination of fusion welded joints — Part 1: Fusion welded butt joints in steel plates up to 50 mm thick
|
95.99 | |
Recommended practice for radiographic examination of fusion welded joints — Part 2: Fusion welded butt joints in steel plates thicker than 50 mm and up to and including 200 mm in thickness
|
95.99 | |
Recommended practice for radiographic examination of fusion welded joints — Part 3: Fusion welded circumferential joints in steel pipes of up to 50 mm wall thickness
|
95.99 | |
Recommended practice for the X-ray inspection of fusion welded butt joints for aluminium and its alloys and magnesium and its alloys 5 to 50 mm thick
|
95.99 | |
Radiography of welds and viewing conditions for films — Utilization of recommended patterns of image quality indicators (I.Q.I.)
|
95.99 | |
Fusion-welded butt joints in steel — Transverse tensile test
|
95.99 | |
Destructive tests on welds in metallic materials — Transverse tensile test
|
95.99 | |
Destructive tests on welds in metallic materials — Transverse tensile test
|
95.99 | |
Destructive tests on welds in metallic materials — Transverse tensile test
|
60.60 | |
Non-destructive testing of welds — Phased array ultrasonic testing (UT-PA) for thin-walled steel components — Acceptance levels
|
60.60 | |
Destructive tests on welds in metallic materials — Bend tests
|
95.99 | |
Destructive tests on welds in metallic materials — Bend tests
|
95.99 | |
Destructive tests on welds in metallic materials — Bend tests — Amendment 1
|
95.99 | |
Destructive tests on welds in metallic materials — Bend tests
|
60.60 | |
Destructive tests on welds in metallic materials — Longitudinal tensile test on weld metal in fusion welded joints
|
95.99 | |
Destructive tests on welds in metallic materials — Longitudinal tensile test on weld metal in fusion welded joints
|
90.93 | |
Spot welding equipment — Taper plug gauges and taper ring gauges
|
95.99 | |
Welds in steel — Calibration block No. 2 for ultrasonic examination of welds
|
95.99 | |
Destructive tests on welds in metallic materials — Hardness testing — Part 1: Hardness test on arc welded joints
|
90.93 | |
Destructive tests on welds in metallic materials — Hardness testing — Part 2: Microhardness testing of welded joints
|
95.99 | |
Destructive tests on welds in metallic materials — Hardness testing — Part 2: Microhardness testing of welded joints
|
90.93 | |
Destructive tests on welds in metallic materials — Impact tests — Test specimen location, notch orientation and examination
|
95.99 | |
Destructive tests on welds in metallic materials — Impact tests — Test specimen location, notch orientation and examination
|
95.99 | |
Destructive tests on welds in metallic materials — Impact tests — Test specimen location, notch orientation and examination
|
60.60 | |
Destructive tests on welds in metallic materials — Fracture test
|
95.99 | |
Destructive tests on welds in metallic materials — Fracture test
|
90.93 | |
Destructive tests on welds in metallic materials — Tensile test on cruciform and lapped joints
|
95.99 | |
Destructive tests on welds in metallic materials — Tensile test on cruciform and lapped joints
|
90.93 | |
Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 1: Steel, nickel, titanium and their alloys
|
95.99 | |
Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 1: Steel, nickel, titanium and their alloys
|
95.99 | |
Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 1: Steel, nickel, titanium and their alloys
|
60.60 | |
Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 2: Aluminium and its alloys
|
95.99 | |
Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 2: Aluminium and its alloys
|
95.99 | |
Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 2: Aluminium and its alloys
|
60.60 | |
Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique (TOFD)
|
95.99 | |
Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique (TOFD)
|
60.60 | |
Non-destructive testing of welds — Ultrasonic testing — Acceptance levels
|
95.99 | |
Non-destructive testing of welds — Ultrasonic testing — Acceptance levels
|
90.93 | |
Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology
|
95.99 | |
Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology
|
90.93 | |
Non-destructive testing of welds — Time-of-flight diffraction technique (TOFD) — Acceptance levels
|
95.99 | |
Non-destructive testing of welds — Time-of-flight diffraction technique (TOFD) — Acceptance levels
|
90.93 | |
Destructive tests on welds in metallic materials — Etchants for macroscopic and microscopic examination
|
90.93 | |
Non-destructive testing — Ultrasonic testing — Technique of testing claddings produced by welding, rolling and explosion
|
95.99 | |
Non-destructive testing — Ultrasonic testing — Technique of testing claddings produced by welding, rolling and explosion
|
60.60 | |
Non-destructive testing of welds — General rules for fusion welds in metallic materials
|
95.99 | |
Non-destructive testing of welds — General rules for metallic materials
|
95.99 | |
Non-destructive testing of welds — General rules for metallic materials
|
90.92 | |
Non-destructive testing of welds — General rules for metallic materials
|
50.00 | |
Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film
|
95.99 | |
Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film
|
60.60 | |
Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors
|
95.99 | |
Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors
|
60.60 | |
Non-destructive testing of welds — Radiographic testing of fusion-welded joints
|
95.99 | |
Non-destructive testing of welds — Visual testing of fusion-welded joints
|
95.99 | |
Non-destructive testing of welds — Visual testing of fusion-welded joints
|
90.93 | |
Non-destructive testing of welds — Magnetic particle testing
|
95.99 | |
Non-destructive testing of welds — Magnetic particle testing
|
90.93 | |
Destructive tests on welds in metallic materials — Macroscopic and microscopic examination of welds
|
95.99 | |
Destructive tests on welds in metallic materials — Macroscopic and microscopic examination of welds
|
60.60 | |
Non-destructive testing of welds — Ultrasonic testing of welded joints
|
95.99 | |
Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment
|
95.99 | |
Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment
|
95.99 | |
Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment
|
90.93 | |
Destructive tests on welds in metallic materials — Hot cracking tests for weldments — Arc welding processes — Part 1: General
|
90.60 | |
Destructive tests on welds in metallic materials — Hot cracking tests for weldments — Arc welding processes — Part 2: Self-restraint tests
|
95.99 | |
Destructive tests on welds in metallic materials — Hot cracking tests for weldments — Arc welding processes — Part 2: Self-restraint tests
|
90.93 | |
Destructive tests on welds in metallic materials — Hot cracking tests for weldments — Arc welding processes — Part 3: Externally loaded tests
|
90.93 | |
Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 1: General
|
90.60 | |
Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 2: Self-restraint tests
|
90.60 | |
Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 3: Externally loaded tests
|
90.60 | |
Non-destructive testing of welds — Eddy current testing of welds by complex-plane analysis
|
95.99 | |
Non-destructive testing of welds — Eddy current testing of welds by complex-plane analysis
|
90.93 | |
Non-destructive testing of welds — Phased array ultrasonic testing (PAUT) — Acceptance levels
|
90.93 | |
Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology for thin-walled steel components
|
90.93 | |
Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys
|
95.99 | |
Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys
|
95.99 | |
Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys
|
90.93 | |
Destructive tests on welds in metallic materials — Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
|
90.20 | |
Non-destructive testing of welds — Penetrant testing of welds — Acceptance levels
|
95.99 | |
Non-destructive testing of welds — Penetrant testing — Acceptance levels
|
90.93 | |
Non-destructive testing of welds — Magnetic particle testing of welds — Acceptance levels
|
95.99 | |
Non-destructive testing of welds — Magnetic particle testing — Acceptance levels
|
90.93 | |
Non-destructive testing of welds — Ultrasonic testing — Characterization of indications in welds
|
95.99 | |
Non-destructive testing of welds — Ultrasonic testing — Characterization of indications in welds
|
95.99 | |
Non-destructive testing of welds — Ultrasonic testing — Characterization of discontinuities in welds
|
90.93 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.