Фильтр :
Стандарт и/или проект | Этап | ТК |
---|---|---|
Pipeline flanges for general use — Metric series — Mating dimensions
|
95.99 | ISO/TC 5 |
Pipeline flanges for general use — Shapes and dimensions of pressure-tight surfaces
|
95.99 | ISO/TC 5 |
Unplasticized polyvinyl chloride (PVC) pressure pipes and fittings, metric series — Dimensions of flanges
|
95.99 | ISO/TC 138/SC 2 |
Metal pipes and fittings — Stainless steel bends and tees for the food industry
|
95.99 | ISO/TC 5 |
Metal pipes and fittings — Stainless steel clamp liners with gaskets for the food industry
|
95.99 | ISO/TC 5/SC 1 |
Metal pipes and fittings — Stainless steel screwed couplings for the food industry
|
95.99 | ISO/TC 5/SC 1 |
Assembled joints between fittings and polyethylene (PE) pressure pipes — Test of leakproofness under internal pressure
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure
|
90.93 | ISO/TC 138/SC 5 |
Polyethylene (PE) pressure pipes — Joints assembled with mechanical fittings — Internal under-pressure test method and requirement
|
95.99 | ISO/TC 138/SC 2 |
Plastic piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under negative pressure
|
95.99 | ISO/TC 138/SC 5 |
Plastic piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under negative pressure
|
60.60 | ISO/TC 138/SC 5 |
Unplasticized polyvinyl chloride (PVC) pressures pipes — Metric series — Dimensions of adapter for backing flange
|
95.99 | ISO/TC 138/SC 2 |
Assembled joints between fittings and polyethylene (PE) pressure pipes — Test of resistance to pull out
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for resistance to pull-out under constant longitudinal force
|
95.99 | ISO/TC 138/SC 5 |
Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for resistance to pull-out under constant longitudinal force
|
60.60 | ISO/TC 138/SC 5 |
Assembled joints between fittings and polyethylene (PE) pressure pipes — Test of leakproofness under internal pressure when subjected to bending
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure of assemblies subjected to bending
|
90.93 | ISO/TC 138/SC 5 |
Polyethylene (PE) pressure pipes and fittings, metric series — Dimensions of flanges
|
95.99 | ISO/TC 138/SC 2 |
Metallic flanges — Part 1: Steel flanges
|
95.99 | ISO/TC 5/SC 10 |
Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems
|
90.93 | ISO/TC 5/SC 10 |
Metallic flanges — Part 2: Cast iron flanges
|
90.93 | ISO/TC 5/SC 10 |
Metallic flanges — Part 3: Copper alloy and composite flanges
|
90.93 | ISO/TC 5/SC 10 |
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods for leaktightness of flexible joints
|
95.99 | ISO/TC 138/SC 6 |
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods for leaktightness and proof of structural design of flexible joints
|
95.99 | ISO/TC 138/SC 6 |
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods for leaktightness and proof of structural design of flexible joints
|
60.60 | ISO/TC 138/SC 6 |
Thermoplastics pipes for fluids under pressure — Mating dimensions of flange adapters and loose backing flanges
|
95.99 | ISO/TC 138/SC 2 |
Thermoplastics piping systems for fluids under pressure — Flange adapters and loose backing flanges — Mating dimensions
|
90.20 | ISO/TC 138/SC 2 |
Thermoplastics piping systems for fluids under pressure — Flange adapters and loose backing flanges — Mating dimensions — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
Plastics pipes and fittings — Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
|
95.99 | ISO/TC 138/SC 5 |
Plastics pipes and fittings — Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
|
95.99 | ISO/TC 138/SC 5 |
Plastics pipes and fittings — Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
|
90.93 | ISO/TC 138/SC 5 |
Plastics pipes and fittings — Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
|
95.99 | ISO/TC 138/SC 5 |
Plastics pipes and fittings — Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
|
90.93 | ISO/TC 138/SC 5 |
Plastics piping systems — Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints — Test method for leaktightness and strength while subjected to bending and internal pressure
|
90.93 | ISO/TC 138/SC 2 |
Plastics piping systems — End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping — Test method for long-term leaktightness under internal water pressure
|
90.93 | ISO/TC 138/SC 2 |
Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
|
90.93 | ISO/TC 138/SC 5 |
Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint — Amendment 1
|
60.60 | ISO/TC 138/SC 5 |
Plastics pipes and fittings — Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
|
90.92 | ISO/TC 138/SC 5 |
Plastics pipes and fittings — Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm — Amendment 1
|
60.60 | ISO/TC 138/SC 5 |
Plastics pipes and fittings — Crushing decohesion test for polyethylene (PE) electrofusion assemblies
|
90.20 | ISO/TC 138/SC 5 |
Plastics pipes and fittings — Crushing decohesion test for polyethylene (PE) electrofusion assemblies — Amendment 1
|
60.60 | ISO/TC 138/SC 5 |
Plastics pipes and fittings — Decohesion test of polyethylene (PE) saddle fusion joints — Evaluation of ductility of fusion joint interface by tear test
|
90.92 | ISO/TC 138/SC 5 |
Metallic tube connections for fluid power and general use — Test methods for hydraulic fluid power connections
|
95.99 | ISO/TC 131/SC 4 |
Metallic tube connections for fluid power and general use — Test methods for hydraulic fluid power connections — Technical Corrigendum 1
|
95.99 | ISO/TC 131/SC 4 |
Metallic tube connections for fluid power and general use — Test methods for hydraulic fluid power connections
|
95.99 | ISO/TC 131/SC 4 |
Metallic tube connections for fluid power and general use — Test methods for hydraulic fluid power connections
|
60.60 | ISO/TC 131/SC 4 |
Plastics piping systems — Thermoplastics pipes and fittings for hot and cold water — Test method for the resistance of joints to pressure cycling
|
90.93 | ISO/TC 138/SC 5 |
Plastics pipes and fittings — Format of a technical file for characterizing PE spigot end fittings
|
90.93 | ISO/TC 138/SC 5 |
Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene butt fusion joints using time of flight diffraction testing
|
50.00 | ISO/TC 138/SC 5 |
Petroleum and natural gas industries — Compact flanged connections with IX seal ring
|
95.99 | ISO/TC 67/SC 6 |
Petroleum and natural gas industries — Compact flanged connections with IX seal ring — Technical Corrigendum 1
|
95.99 | ISO/TC 67/SC 6 |
Petroleum and natural gas industries — Compact flanged connections with IX seal ring
|
60.60 | ISO/TC 67/SC 6 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.