Фильтр :
Стандарт и/или проект находящийся в компетенции ISO/TC 45/SC 4 Секретариата | Этап | ICS |
---|---|---|
Withdrawal of ISO/R 1398-1970 |
95.99 | |
Rubber- or plastics-coated fabrics — Accelerated-ageing tests |
95.99 | |
Rubber- or plastics-coated fabrics — Accelerated-ageing tests |
95.99 | |
Rubber- or plastics-coated fabrics — Accelerated-ageing tests |
60.60 | |
Rubber- or plastics-coated fabrics — Determination of resistance to penetration by water |
95.99 | |
Rubber- or plastics-coated fabrics — Determination of resistance to penetration by water |
95.99 | |
Rubber- or plastics-coated fabrics — Determination of resistance to penetration by water |
90.93 | |
Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break |
95.99 | |
Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break |
90.93 | |
Rubber, vulcanized — Preferred gradations of properties |
95.99 | |
Flexible cellular polymeric materials — Determination of tensile strength and elongation at break |
95.99 | |
Flexible cellular polymeric materials — Determination of tensile strength and elongation at break — Technical Corrigendum 1 |
95.99 | |
Flexible cellular polymeric materials — Determination of tensile strength and elongation at break |
90.93 | |
Flexible cellular polymeric materials — Determination of compression set |
95.99 | |
Flexible cellular polymeric materials — Determination of compression set — Amendment 1 |
95.99 | |
Flexible cellular polymeric materials — Determination of compression set |
90.20 | |
Vulcanized rubber — Guide to storage |
95.99 | |
Rubber products — Guidelines for storage |
90.20 | |
Rubber- or plastics-coated fabrics — Standard atmospheres for conditioning and testing |
90.93 | |
Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 1: Methods for determination of length, width and net mass |
95.99 | |
Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 1: Methods for determination of length, width and net mass |
90.93 | |
Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate |
95.99 | |
Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate |
90.93 | |
Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 3: Method for determination of thickness |
95.99 | |
Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 3: Method for determination of thickness |
90.93 | |
Rubber threads — Methods of test |
95.99 | |
Rubber threads — Methods of test |
95.99 | |
Rubber threads — Methods of test |
90.93 | |
Rubber- or plastics-coated fabrics — Determination of coating adhesion |
95.99 | |
Rubber- or plastics-coated fabrics — Determination of coating adhesion |
90.92 | |
Rubber- or plastics-coated fabrics — Determination of coating adhesion |
40.20 | |
Polymeric materials, cellular flexible — Determination of hardness (indentation technique) |
95.99 | |
Flexible cellular polymeric materials — Determination of hardness (indentation technique) |
95.99 | |
Flexible cellular polymeric materials — Determination of hardness (indentation technique) — Technical Corrigendum 1 |
95.99 | |
Flexible cellular polymeric materials — Determination of hardness (indentation technique) |
90.93 | |
Flexible and rigid cellular polymeric materials — Accelerated ageing tests |
95.99 | |
Flexible and rigid cellular polymeric materials — Accelerated ageing tests — Amendment 1 |
95.99 | |
Flexible and rigid cellular polymeric materials — Accelerated ageing tests — Amendment 2 |
95.99 | |
Flexible and rigid cellular polymeric materials — Accelerated ageing tests |
90.92 | |
Flexible and rigid cellular polymeric materials — Accelerated ageing tests |
30.60 | |
Rubber- or plastics-coated fabrics — Determination of resistance to ozone cracking under static conditions |
95.99 | |
Rubber- or plastics-coated fabrics — Determination of resistance to ozone cracking under static conditions |
60.60 | |
Rubber — Tolerances for products — Part 1: Dimensional tolerances |
95.99 | |
Rubber — Tolerances for products — Part 1: Dimensional tolerances — Amendment 1: Classification system for flash |
95.99 | |
Rubber — Tolerances for products — Part 1: Dimensional tolerances |
90.93 | |
Rubber — Tolerances for products — Part 2: Geometrical tolerances |
95.99 | |
Rubber — Tolerances for products — Part 2: Geometrical tolerances |
95.99 | |
Rubber — Tolerances for products — Part 2: Geometrical tolerances |
60.60 | |
Rubber — Dimensional tolerances for use with products |
95.99 | |
Rubber- or plastics-coated fabrics — Determination of bursting strength — Part 1: Steel-ball method |
95.99 | |
Rubber- or plastics-coated fabrics — Determination of bursting strength — Part 1: Steel-ball method |
60.60 | |
Rubber- or plastics-coated fabrics — Determination of bursting strength — Part 2: Hydraulic method |
95.99 | |
Rubber- or plastics-coated fabrics — Determination of bursting strength — Part 2: Hydraulic method |
60.60 | |
Rubber- or plastics-coated fabrics — Determination of bursting strength |
95.99 | |
Flexible cellular polymeric materials — Determination of fatigue by constant-load pounding |
95.99 | |
Flexible cellular polymeric materials — Determination of fatigue by constant-load pounding |
90.93 | |
Polymeric materials, cellular flexible — Determination of stress-strain characteristics in compression — Part 1: Low-density materials |
90.20 | |
Polymeric materials, cellular flexible — Determination of stress-strain characteristics in compression — Part 1: Low-density materials — Amendment 1 |
60.60 | |
Flexible cellular polymeric materials — Determination of stress-strain characteristics in compression — Part 2: High-density materials |
90.20 | |
Flexible cellular polymeric materials — Determination of stress-strain characteristics in compression — Part 2: High-density materials — Amendment 1 |
60.60 | |
Flexible cellular polymeric materials — Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame |
90.93 | |
Flexible cellular polymeric materials — Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame — Amendment 1 |
60.60 | |
Rubber building gaskets — Materials in preformed solid vulcanizates used for sealing glazing and panels — Specification |
95.99 | |
Rubber, vulcanized and thermoplastic — Preformed gaskets used in buildings — Classification, specifications and test methods |
95.99 | |
Rubber, vulcanized and thermoplastic — Preformed gaskets used in buildings — Classification, specifications and test methods |
60.60 | |
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials |
95.99 | |
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials |
95.99 | |
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials |
95.99 | |
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials |
90.92 | |
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials |
50.20 | |
Rubber, vulcanized — Preformed compression seals for use between concrete motorway paving sections — Specification for material |
95.99 | |
Rubber, vulcanized — Preformed joint seals for use between concrete paving sections of highways — Specification |
90.93 | |
Rubber-coated fabrics — Determination of rubber-to-fabric adhesion — Direct tension method |
90.93 | |
Polymeric materials, cellular flexible — Determination of air flow permeability |
90.93 | |
Rubber- or plastics-coated fabrics — Low-temperature impact test |
95.99 | |
Rubber- or plastics-coated fabrics — Low-temperature impact test |
60.60 | |
Cellular rubbers and plastics — Determination of dynamic cushioning performance |
90.93 | |
Cellular rubbers and plastics — Determination of dynamic cushioning performance — Amendment 1 |
60.60 | |
Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 1: Constant rate of tear methods |
95.99 | |
Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 1: Constant rate of tear methods |
90.93 | |
Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 2: Ballistic pendulum method |
95.99 | |
Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 2: Ballistic pendulum method |
60.60 | |
Fabrics coated with rubber or plastics — Determination of tear resistance |
95.99 | |
Rubber- or plastics-coated fabrics — Low-temperature bend test |
95.99 | |
Rubber- or plastics-coated fabrics — Low-temperature bend test |
90.93 | |
Rubber latex coated fabric gloves — Specification |
40.60 | |
Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 1: Taber abrader |
95.99 | |
Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 1: Taber abrader |
90.93 | |
Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 2: Martindale abrader |
95.99 | |
Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 2: Martindale abrader |
60.60 | |
Rubber- or plastics-coated fabrics — Determination of crush resistance |
90.20 | |
Rubber building gaskets — Materials for preformed solid vulcanized structural gaskets — Specification |
95.99 | |
Rubber building gaskets — Materials for preformed solid vulcanized structural gaskets — Specification |
90.92 | |
Rubber building gaskets — Materials for preformed solid vulcanized structural gaskets — Specification |
40.20 | |
Rubber- or plastics-coated fabrics — Determination of blocking resistance |
90.92 | |
Rubber- or plastics-coated fabrics — Determination of blocking resistance |
50.20 | |
Rubber or plastics coated fabrics — Determination of flexibility — Flat loop method |
90.93 | |
Rubber- or plastics-coated fabrics — Determination of resistance to combined shear flexing and rubbing |
95.99 | |
Rubber- or plastics-coated fabrics — Determination of resistance to combined shear flexing and rubbing |
90.93 | |
Polymeric materials, cellular flexible — Polyurethane foam for load-bearing applications excluding carpet underlay — Specification |
95.99 | |
Flexible cellular polymeric materials — Polyurethane foam for load-bearing applications excluding carpet underlay — Specification |
95.99 | |
Flexible cellular polymeric materials — Polyurethane foam for load-bearing applications excluding carpet underlay — Specification |
90.20 | |
Rubber — Compatibility between hydraulic fluids and standard elastomeric materials |
90.93 | |
Rubber or plastics covered rollers — Specifications — Part 1: Requirements for hardness |
95.99 | |
Rubber or plastics covered rollers — Specifications — Part 1: Requirements for hardness |
90.93 | |
Rubber- or plastics-covered rollers — Specifications — Part 2: Surface characteristics |
95.99 | |
Rubber or plastics covered rollers — Specifications — Part 2: Surface characteristics |
90.93 | |
Rubber- or plastics-covered rollers — Specifications — Part 3: Dimensional tolerances |
90.20 | |
Rubber products — Bridge bearings — Specification for rubber materials |
90.93 | |
Rubber seals — Joint rings used for gas supply pipes and fittings — Specification for material |
95.99 | |
Rubber seals — Joint rings used for petroleum product supply pipes and fittings — Specification for material |
95.99 | |
Rubber- or plastics-coated fabrics — Determination of resistance to liquids |
95.99 | |
Rubber- or plastics-coated fabrics — Determination of resistance to liquids |
60.60 | |
Plastics coated fabrics — Polyvinyl chloride coatings — Rapid method for checking fusion |
90.93 | |
Rubber- or plastics-coated fabrics — Determination of fogging characteristics of trim materials in the interior of automobiles |
95.99 | |
Rubber- or plastics-coated fabrics — Determination of fogging characteristics of trim materials in the interior of automobiles |
95.99 | |
Rubber- or plastics-coated fabrics — Determination of fogging characteristics of trim materials in the interior of automobiles |
60.60 | |
Polymeric materials, cellular flexible — Polyvinylchloride foam sheeting — Specification |
90.20 | |
Flexible cellular polymeric materials — Polyurethane foam for laminate use — Specification |
95.99 | |
Flexible cellular polymeric materials — Polyurethane foam for laminate use — Specification |
60.60 | |
Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 1: Sheeting |
90.93 | |
Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 1: Sheeting — Amendment 1 |
60.60 | |
Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 1: Sheeting — Technical Corrigendum 1: Sheeting |
60.60 | |
Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 2: Mouldings and extrusions |
90.92 | |
Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 2: Mouldings and extrusions |
40.00 | |
Rubber- or plastics-coated fabrics — Measurement of gas permeability |
95.99 | |
Rubber- or plastics-coated fabrics — Measurement of gas permeability |
95.99 | |
Rubber- or plastics-coated fabrics — Measurement of gas permeability |
60.60 | |
Polymeric materials, cellular flexible — Method of assessment of air flow value at constant pressure-drop |
95.99 | |
Polymeric materials, cellular, flexible — Determination of air flow value at constant pressure-drop |
90.92 | |
Polymeric materials, cellular, flexible — Determination of air flow value at constant pressure-drop |
50.20 | |
Plastics-coated fabrics for upholstery — Part 1: Specification for PVC-coated knitted fabrics |
95.99 | |
Plastics-coated fabrics for upholstery — Part 1: Specification for PVC-coated knitted fabrics |
90.92 | |
Plastics-coated fabrics for upholstery — Part 1: Specification for PVC-coated knitted fabrics |
40.00 | |
Plastics-coated fabrics for upholstery — Part 2: Specification for PVC-coated woven fabrics |
95.99 | |
Plastics-coated fabrics for upholstery — Part 2: Specification for PVC-coated woven fabrics |
90.20 | |
Plastics-coated fabrics for upholstery — Part 3: Specification for polyurethane-coated woven fabrics |
90.20 | |
Rubber materials — Chemical resistance |
95.99 | |
Rubber materials — Chemical resistance |
90.93 | |
Rubber or plastics covered rollers — Enquiries and orders — Recommendations for technical information to be supplied by purchaser |
90.93 | |
Rubber- or plastics-coated fabrics — Determination of resistance to damage by flexing |
90.93 | |
Flexible cellular polymeric materials — Determination of tear strength |
95.99 | |
Flexible cellular polymeric materials — Determination of tear strength |
95.99 | |
Flexible cellular polymeric materials — Determination of tear strength |
90.20 | |
PVC-coated fabrics for tarpaulins — Specification |
90.93 | |
Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Part 1: PVC-coated fabrics |
95.99 | |
Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Part 1: PVC-coated fabrics — Technical Corrigendum 1 |
95.99 | |
Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Part 2: Polyurethane- and silicone elastomer-coated fabrics |
95.99 | |
Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Part 3: Natural rubber- and synthetic rubber-coated fabrics |
95.99 | |
Rubber- or plastics-coated fabrics for water-resistant clothing — Specification |
90.20 | |
Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Technical Corrigendum 1 |
60.60 | |
Flexible cellular polymeric materials — Determination of resilience |
95.99 | |
Flexible cellular polymeric materials — Determination of resilience by ball rebound |
95.99 | |
Flexible cellular polymeric materials — Determination of resilience by ball rebound |
90.20 | |
Rubber- or plastics-covered rollers — Glossary |
90.93 | |
Rubber seals — Joint rings for hot water supply pipelines up to 110 degrees C — Specification for the material |
95.99 | |
Rubber seals — Joint rings for pipelines for hot-water supply up to 110 degrees C — Specification for the material |
95.99 | |
Rubber seals — Joint rings for pipelines for hot-water supply up to 110 °C — Specification for the material |
90.20 | |
Rubber — Recommendations for the workmanship of pipe joint rings — Description and classification of imperfections |
90.20 | |
Flexible cellular polymeric materials — Determination of creep in compression |
90.20 | |
Single-use sterile surgical rubber gloves — Specification |
95.99 | |
Single-use sterile rubber surgical gloves — Specification |
95.99 | |
Single-use sterile rubber surgical gloves — Specification — Technical Corrigendum 1 |
95.99 | |
Single-use sterile rubber surgical gloves — Specification |
95.99 | |
Single-use sterile rubber surgical gloves — Specification |
60.60 | |
Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution |
95.99 | |
Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution — Amendment 1 |
95.99 | |
Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution — Technical Corrigendum 1 |
95.99 | |
Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution |
95.99 | |
Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution — Amendment 1 |
95.99 | |
Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution |
90.92 | |
Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution |
30.00 |
|
Single-use medical examination gloves — Part 2: Specification for gloves made from poly(vinyl chloride) |
90.92 | |
Single-use medical examination gloves — Part 2: Specification for gloves made from poly(vinyl chloride) |
30.00 |
|
Single-use rubber examination gloves — Specification |
95.99 | |
Flexible cellular polymeric materials — Moulded and extruded sponge or expanded cellular rubber products — Compressibility test on finished parts |
90.93 | |
Flexible cellular polymeric materials — Moulded and extruded sponge or expanded cellular rubber products — Compressibility test on finished parts — Amendment 1 |
60.60 | |
Flexible cellular polymeric materials — Determination of compression set under humid conditions |
90.93 | |
Rubber and plastics gloves for food services — Limits for extractable substances |
90.93 | |
Elastomeric seals — Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids |
95.99 | |
Elastomeric seals — Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids |
60.60 | |
Rubber, vulcanized — Guidelines for material specification |
60.60 | |
Rubber- or plastics-coated fabrics — Determination of water absorption resistance |
30.60 | |
Meteorological balloons — Specification |
90.92 | |
Meteorological balloons — Specification |
40.20 | |
Rubber household gloves — General requirements and test methods |
90.93 | |
General purpose rubber thread — Specification |
90.93 | |
Natural rubber latex cleanroom gloves — Specification |
90.93 | |
Medical gloves — Determination of removable surface powder |
90.93 | |
Rubber- or plastic-coated fabrics — Physical and mechanical test — Determination of bending force |
60.60 | |
Elastomeric seismic-protection isolators — Part 1: Test methods |
95.99 | |
Elastomeric seismic-protection isolators — Part 1: Test methods — Technical Corrigendum 1 |
95.99 | |
Elastomeric seismic-protection isolators — Part 1: Test methods |
95.99 | |
Elastomeric seismic-protection isolators — Part 1: Test methods |
90.20 | |
Elastomeric seismic-protection isolators — Part 2: Applications for bridges — Specifications |
95.99 | |
Elastomeric seismic-protection isolators — Part 2: Applications for bridges — Specifications — Technical Corrigendum 1 |
95.99 | |
Elastomeric seismic-protection isolators — Part 2: Applications for bridges — Specifications |
95.99 | |
Elastomeric seismic-protection isolators — Part 2: Applications for bridges — Specifications |
90.20 | |
Elastomeric seismic-protection isolators — Part 3: Applications for buildings — Specifications |
95.99 | |
Elastomeric seismic-protection isolators — Part 3: Applications for buildings — Specifications — Technical Corrigendum 1 |
95.99 | |
Elastomeric seismic-protection isolators — Part 3: Applications for buildings — Specifications |
95.99 | |
Elastomeric seismic-protection isolators — Part 3: Applications for buildings — Specifications |
90.20 | |
Elastomeric seismic-protection isolators — Part 4: Guidance on the application of ISO 22762-3 |
95.99 | |
Elastomeric seismic-protection isolators — Part 4: Guidance on the application of ISO 22762-3 |
90.93 | |
Elastomeric seismic-protection isolators — Part 5: Sliding seismic-protection isolators for buildings |
60.60 | |
Elastomeric seismic-protection isolators — Part 6: High-durability and high-performance specifications and test methods |
60.60 | |
Practical guidance on the use of ISO 22762 for design and testing of seismic isolation systems — Part 7: Title missing |
30.99 | |
Rubber bands — General requirements and test methods |
60.60 | |
Rubber sheets for livestock — Dairy cattle — Specification |
60.60 | |
Nitrile cleanroom gloves — Specification |
60.60 | |
Flexible cellular polymeric materials — Determination of antibacterial effectiveness |
60.60 | |
Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers |
95.99 | |
Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers |
60.60 | |
Flexible cellular polymeric materials — Determination of fatigue by a constant-strain procedure |
90.93 | |
Single-use rubber gloves for general applications — Specification |
95.99 | |
Single-use rubber gloves for general applications — Specification |
60.60 | |
Rubber- or plastics-coated fabrics — Physical and mechanical tests — Determination of flex resistance by the flexometer method |
95.99 | |
Rubber- or plastics-coated fabrics — Physical and mechanical tests — Determination of flex resistance by the flexometer method |
90.20 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.