Subcommittee | Subcommittee Title | Published standards | Standards under development |
---|---|---|---|
ISO/TC 44/SC 3 | Welding consumables | 36 | 5 |
ISO/TC 44/SC 5 | Testing and inspection of welds | 38 | 1 |
ISO/TC 44/SC 6 | Resistance welding and allied mechanical joining | 62 | 1 |
ISO/TC 44/SC 7 | Representation and terms | 17 | 1 |
ISO/TC 44/SC 8 | Equipment for gas welding, cutting and allied processes | 28 | 5 |
ISO/TC 44/SC 9 | Health and safety | 16 | 1 |
ISO/TC 44/SC 10 | Quality management in the field of welding | 78 | 14 |
ISO/TC 44/SC 11 | Qualification requirements for welding and allied processes personnel | 12 | 2 |
ISO/TC 44/SC 12 | Soldering materials | 20 | 0 |
ISO/TC 44/SC 13 | Brazing materials and processes | 6 | 0 |
ISO/TC 44/SC 14 | Welding and brazing in aerospace | 7 | 2 |
ISO/TC 44/SC 15 | Underwater welding | 3 | 1 |
Filter :
Standard and/or project under the direct responsibility of ISO/TC 44 Secretariat | Stage | ICS |
---|---|---|
Electrodes for manual arc welding and filler metals for gas welding — Diameters and tolerances
|
95.99 | |
Filler rods, other than drawn or extruded, for welding — Lengths and tolerance
|
95.99 | |
Drawn or extruded filler rods for welding, supplied in straight lengths — Lengths and tolerance
|
95.99 | |
Electrodes for the welding of mild steel and low alloy high tensile steel — Lengths and tolerance
|
95.99 | |
Withdrawal of ISO/R 598-1967
|
95.99 | |
Methods for determining the mechanical properties of the weld metal deposited by electrodes 3,15 mm or more in diameter
|
95.99 | |
Calculation of rectangular symmetrical fillet welds statically loaded in such a way that the transverse section is not under any normal stress
|
95.99 | |
Withdrawal of ISO/R 626-1967
|
95.99 | |
Withdrawal of ISO/R 627-1967
|
95.99 | |
Withdrawal of ISO/R 632-1967
|
95.99 | |
Withdrawal of ISO/R 635-1967
|
95.99 | |
Withdrawal of ISO 636-1975
|
95.99 | |
Withdrawal of ISO 637-1975
|
95.99 | |
Withdrawal of ISO/R 670-1968
|
95.99 | |
Withdrawal of ISO 688-1975
|
95.99 | |
Power sources for manual metal arc welding with covered electrodes and for the TIG process
|
95.99 | |
Withdrawal of ISO/R 708-1968
|
95.99 | |
Definitions of welding processes
|
95.99 | |
Solid wires for gas-shielded metal-arc welding of mild steel — Dimensions of wires, spools, rims and coils
|
95.99 | |
Withdrawal of ISO/R 876-1968
|
95.99 | |
Recommended practice for radiographic inspection of circumferential fusion welded butt joints in steel pipes up to 50 mm (2 in) wall thickness
|
95.99 | |
Recommended practice for radiographic inspection of circumferential fusion welded butt joints in steel pipes up to 50 mm (2 in) wall thickness — Addendum 1
|
95.99 | |
Withdrawal of ISO/R 1045-1969
|
95.99 | |
Recommended practice for radiographic inspection of fusion welded butt joints for steel plates up to 50 mm (2 in) thick
|
95.99 | |
Recommended practice for radiographic inspection of fusion welded butt joints for steel plates 50 to 200 mm thick
|
95.99 | |
Welds — Symbolic representation on drawings
|
95.99 | |
Covered electrodes for manual arc welding of mild steel and low alloy steel — Code of symbols for identification
|
95.99 | |
Covered electrodes for manual arc welding of mild steel and low alloy steel — Code of symbols for identification — Addendum 1
|
95.99 | |
Filler metals for brazing and soldering — Code of symbols
|
95.99 | |
Filler metal for soft soldering, brazing and braze welding — Designation
|
95.99 | |
Soft soldered joints — Determination of shear strength
|
95.99 | |
Welding — Flexible hoses for gas welding and allied processes
|
95.99 | |
Welding — Factors to be considered when assessing firms using welding as a prime means of fabrication
|
95.99 | |
Welded joints — Recommended practice for liquid penetrant testing
|
95.99 | |
Welding, brazing, braze welding and soldering of metals — List of processes, for symbolic representation on drawings
|
95.99 | |
Pressure gauges used in welding, cutting and related processes
|
95.99 | |
Manual blowpipes for welding and cutting
|
95.99 | |
Fusion welded butt joints in steel — Transverse root and face bend test
|
95.99 | |
Fusion welded butt joints in steel — Transverse side bend test
|
95.99 | |
Materials for resistance welding electrodes and ancillary equipment
|
95.99 | |
Resistance spot welding electrode adaptors
|
95.99 | |
Fundamental welding positions — Definitions and values of angles of slope and rotation for straight welds for these positions
|
95.99 | |
Brazing — Filler metals
|
95.99 | |
Numerical welding simulation — Execution and documentation
|
30.60 |
|
Numerical welding simulation — Execution and documentation
|
90.92 | |
Arc welding equipment — — Part 1: Welding power sources
|
95.99 |
No matching records found. Please try changing the filter settings.