International Standard
ISO 13232-7:2005
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests
Reference number
ISO 13232-7:2005
Edition 2
2005-12
International Standard
Read sample
ISO 13232-7:2005
37427
Published (Edition 2, 2005)
This standard was last reviewed and confirmed in 2021. Therefore this version remains current.
This standard has 2 amendments.

ISO 13232-7:2005

ISO 13232-7:2005
37427
Language
Format
CHF 151
Convert Swiss francs (CHF) to your currency

Abstract

The purposes of ISO 13232-7:2005 are to provide:

  • conventions for calibrating and documenting the important features of the simulation models;
  • guidelines for definition and use of mathematical models for motorcycle impact simulations, which can be correlated against data for full-scale tests;
  • a means for identifying possible additional impact conditions for full-scale testing; and
  • a standardized tool, of optional use, for risk/benefit analysis of rider crash protective devices fitted to motorcycles, based upon the population of impact conditions identified in ISO 13232-2.

ISO 13232 specifies the minimum requirements for research into the feasibility of protective devices fitted to motorcycles, which are intended to protect the rider in the event of a collision.

ISO 13232 is applicable to impact tests involving:

  • two-wheeled motorcycles;
  • the specified type of opposing vehicle;
  • either a stationary and a moving vehicle or two moving vehicles;
  • for any moving vehicle, a steady speed and straight-line motion immediately prior to impact;
  • one helmeted dummy in a normal seating position on an upright motorcycle;
  • the measurement of the potential for specified types of injury by body region; and
  • evaluation of the results of paired impact tests (i.e. comparisons between motorcycles fitted and not fitted with the proposed devices).

ISO 13232 does not apply to testing for regulatory or legislative purposes.

General information

  •  : Published
     : 2005-12
    : International Standard confirmed [90.93]
  •  : 2
     : 27
  • ISO/TC 22/SC 38
    43.140 
  • RSS updates

 Amendments

Amendments are issued when it is found that new material may need to be added to an existing standardization document. They may also include editorial or technical corrections to be applied to the existing document.

Amendment 1

Ground impact

Edition 2012

ISO 13232-7:2005/Amd 1:2012
57250
Language
Format
CHF 18
Convert Swiss francs (CHF) to your currency

Amendment 2

Correlation factors

Edition 2023

ISO 13232-7:2005/Amd 2:2023
85033
Language
Format
CHF 18
Convert Swiss francs (CHF) to your currency

Life cycle

Got a question?

Check out our FAQs

Customer care
+41 22 749 08 88

Opening hours:
Monday to Friday - 09:00-12:00, 14:00-17:00 (UTC+1)