ISO 10848-3:2017

Published (Edition 2, 2017)

This publication was last reviewed and confirmed in 2023. Therefore this version remains current.

ISO 10848-3:2017

CHF 63

Convert Swiss francs (CHF) to your currency

Abstract

ISO 10848 (all parts) specifies measurement methods to characterize the flanking transmission of one or several building components.

ISO 10848-3:2017 specifies laboratory and field measurements of buildings for Type B elements (defined in ISO 10848‑1) when the junction has a substantial influence.

Laboratory measurements are used to quantify the performance of the junction with suppressed flanking transmission from the laboratory structure. Field measurements are used to characterize the in situ performance and it is not usually possible to suppress unwanted flanking transmission sufficiently; hence, the results can only be considered representative of the performance of that junction when installed in that particular building structure.

ISO 10848-3:2017 is referred to in ISO 10848‑1:2017, 4.5 as being a supporting part to the frame document and applies to Type B elements that are structurally connected as defined in ISO 10848‑1.

The measured quantities can be used to compare different products, or to express a requirement, or as input data for prediction methods, such as ISO 12354‑1 and ISO 12354‑2.

The relevant quantity to be measured is selected according to ISO 10848‑1:2017, 4.5. The performance of the building components is expressed either as an overall quantity for the combination of elements and junction (such as Dn,f,ij and/or Ln,f,ij and/or Lne0,f,ij) or as the normalized direction-average velocity level difference of a junction. Dn,f,ij, Ln,f,ij, Lne0,f,ij and depend on the actual dimensions of the elements.

General information

Status
: Published

Publication date
: 2017-09

Stage
: International Standard confirmed [90.93]
Edition
: 2

Number of pages
: 8
Technical Committee :
ISO/TC 43/SC 2

ICS :
91.120.20
RSS updates