Filter :
| Standard and/or project(41) | Stage | TC |
|---|---|---|
|
Withdrawal of ISO/R 541-1967
|
95.99 | ISO/TC 30 |
|
Withdrawal of ISO/R 781-1968
|
95.99 | ISO/TC 30 |
|
Fluid flow in closed conduits — Connections for pressure signal transmissions between primary and secondary elements
|
95.99 | ISO/TC 30/SC 2 |
|
Fluid flow in closed conduits — Connections for pressure signal transmissions between primary and secondary elements
|
90.92 | ISO/TC 30/SC 2 |
|
Measurement of water flow in closed conduits — Tracer methods — Part 1: General
|
90.93 | ISO/TC 30/SC 5 |
|
Measurement of water flow in closed conduits — Tracer methods — Part 2: Constant rate injection method using non-radioactive tracers
|
90.60 | ISO/TC 30/SC 5 |
|
Measurement of water flow in closed conduits — Tracer methods — Part 3: Constant rate injection method using radioactive tracers
|
95.99 | ISO/TC 30/SC 5 |
|
Measurement of water flow in closed conduits — Tracer methods — Part 6: Transit time method using non-radioactive tracers
|
90.93 | ISO/TC 30/SC 5 |
|
Measurement of water flow in closed conduits — Tracer methods — Part 7: Transit time method using radioactive tracers
|
95.99 | ISO/TC 30/SC 5 |
|
Measurement of pulsating fluid flow in a pipe by means of orifice plates, nozzles or Venturi tubes, in particular in the case of sinusoidal or square wave intermittent periodic-type fluctuations
|
95.99 | ISO/TC 30 |
|
Measurement of pulsating fluid flow in a pipe by means of orifice plates, nozzles or Venturi tubes
|
95.99 | ISO/TC 30/SC 2 |
|
Measurement of fluid flow in closed conduits — Guidelines on the effects of flow pulsations on flow-measurement instruments
|
95.99 | ISO/TC 30/SC 2 |
|
Measurement of fluid flow in closed conduits — Guidelines on the effects of flow pulsations on flow-measurement instruments
|
90.93 | ISO/TC 30/SC 2 |
|
Measurement of clean water flow in closed conduits — Velocity-area method using current-meters
|
95.99 | ISO/TC 30 |
|
Measurement of clean water flow in closed conduits — Velocity-area method using current-meters in full conduits and under regular flow conditions
|
95.99 | ISO/TC 30/SC 5 |
|
Measurement of clean water flow in closed conduits — Velocity-area method using current-meters in full conduits and under regular flow conditions
|
90.60 | ISO/TC 30/SC 5 |
|
Measurement of fluid flow in closed conduits — Velocity area method using Pitot static tubes
|
95.99 | ISO/TC 30/SC 5 |
|
Measurement of fluid flow in closed conduits — Velocity area method using Pitot static tubes
|
95.99 | ISO/TC 30/SC 5 |
|
Measurement of fluid flow in closed conduits — Velocity area method using Pitot static tubes
|
90.92 | ISO/TC 30/SC 5 |
|
Measurement of fluid flow in closed conduits — Velocity area method using Pitot static tubes
|
40.99 | ISO/TC 30/SC 5 |
|
Measurement of fluid flow in closed conduits — Vocabulary and symbols
|
95.99 | ISO/TC 30 |
|
Measurement of fluid flow in closed conduits — Vocabulary and symbols
|
90.60 | ISO/TC 30 |
|
Measurement of gas flow in conduits — Tracer methods — Part 1: General
|
95.99 | ISO/TC 30/SC 5 |
|
Measurement of gas flow in conduits — Tracer methods — Part 4: Transit time method using radioactive tracers
|
95.99 | ISO/TC 30/SC 5 |
|
Measurement of liquid flow in closed conduits — Weighing method
|
90.60 | ISO/TC 30 |
|
Measurement of liquid flow in closed conduits — Weighing method — Technical Corrigendum 1
|
60.60 | ISO/TC 30 |
|
Measurement of fluid flow by means of pressure differential devices — Part 1: Orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full
|
95.99 | ISO/TC 30/SC 2 |
|
Measurement of fluid flow by means of pressure differential devices — Part 1: Orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full — Amendment 1
|
95.99 | ISO/TC 30/SC 2 |
|
Measurement of fluid flow by means of pressure differential devices — Part 1: Orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full — Technical Corrigendum 1: (Applies to French version only)
|
95.99 | ISO/TC 30/SC 2 |
|
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 1: General principles and requirements
|
95.99 | ISO/TC 30/SC 2 |
|
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 1: General principles and requirements
|
60.60 | ISO/TC 30/SC 2 |
|
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 2: Orifice plates
|
95.99 | ISO/TC 30/SC 2 |
|
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 2: Orifice plates
|
60.60 | ISO/TC 30/SC 2 |
|
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 3: Nozzles and Venturi nozzles
|
95.99 | ISO/TC 30/SC 2 |
|
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 3: Nozzles and Venturi nozzles
|
95.99 | ISO/TC 30/SC 2 |
|
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 3: Nozzles and Venturi nozzles
|
60.60 | ISO/TC 30/SC 2 |
|
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 4: Venturi tubes
|
95.99 | ISO/TC 30/SC 2 |
|
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 4: Venturi tubes
|
60.60 | ISO/TC 30/SC 2 |
|
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 5: Cone meters
|
95.99 | ISO/TC 30/SC 2 |
|
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 5: Cone meters
|
60.60 | ISO/TC 30/SC 2 |
|
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 6: Wedge meters
|
95.99 | ISO/TC 30/SC 2 |
|
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 6: Wedge meters
|
60.60 | ISO/TC 30/SC 2 |
|
Measurement of fluid flow by means of orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full
|
95.99 | ISO/TC 30 |
|
Measurement of fluid flow — Estimation of uncertainty of a flow-rate measurement
|
95.99 | ISO/TC 30 |
|
Measurement of fluid flow — Evaluation of uncertainties
|
95.99 | ISO/TC 30 |
|
Measurement of fluid flow — Procedures for the evaluation of uncertainties
|
90.92 | ISO/TC 30 |
|
Measurement of conductive liquid flow in closed conduits — Method using electromagnetic flowmeters
|
95.99 | ISO/TC 30/SC 5 |
|
Measurement of conductive fluid flowrate in closed conduits — Method using electromagnetic flowmeters
|
95.99 | ISO/TC 30 |
|
Assessment of uncertainty in the calibration and use of flow measurement devices — Part 1: Linear calibration relationships
|
95.99 | ISO/TC 30 |
|
Assessment of uncertainty in the calibration and use of flow measurement devices — Part 2: Non-linear calibration relationships
|
90.93 | ISO/TC 30 |
|
Determination of flowrate of fluids in closed conduits of circular cross-section — Method of velocity measurement at one point of the cross-section
|
95.99 | ISO/TC 30/SC 5 |
|
Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
|
95.99 | ISO/TC 30/SC 5 |
|
Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
|
95.60 | ISO/TC 30/SC 5 |
|
Measurement of liquid flow in closed conduits — Method by collection of the liquid in a volumetric tank
|
90.60 | ISO/TC 30 |
|
Measurement of fluid flow in closed conduits — Methods of evaluating the performance of electromagnetic flow-meters for liquids
|
95.99 | ISO/TC 30/SC 5 |
|
Measurement of gas flow by means of critical flow Venturi nozzles
|
95.99 | ISO/TC 30/SC 2 |
|
Measurement of gas flow by means of critical flow Venturi nozzles
|
95.99 | ISO/TC 30/SC 2 |
|
Measurement of gas flow by means of critical flow nozzles
|
90.92 | ISO/TC 30/SC 2 |
|
Measurement of liquid flow in closed conduits by the weighing method — Procedures for checking installations — Part 1: Static weighing systems
|
90.60 | ISO/TC 30 |
|
Guidelines for the use of ISO 5167-1:1991
|
95.99 | ISO/TC 30/SC 2 |
|
Guidelines for the use of ISO 5167:2003
|
95.99 | ISO/TC 30/SC 2 |
|
Guidelines for the use of ISO 5167:2022
|
60.60 | ISO/TC 30/SC 2 |
|
Measurement of free surface flow in closed conduits — Part 1: Methods
|
95.99 | ISO/TC 113/SC 1 |
|
Measurement of free surface flow in closed conduits — Part 2: Equipment
|
95.99 | ISO/TC 113/SC 5 |
|
Hydrometry — Measurement of free surface flow in closed conduits
|
60.60 | ISO/TC 113/SC 1 |
|
Measurement of gas flow in closed conduits — Turbine meters
|
90.92 | ISO/TC 30 |
|
Measurement of gas flow in closed conduits — Turbine meters — Technical Corrigendum 1
|
60.60 | ISO/TC 30 |
|
Measurement of fluid flow in closed conduits — Coriolis mass flowmeters
|
95.99 | ISO/TC 30/SC 5 |
|
Measurement of fluid flow in closed conduits — Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
|
95.99 | ISO/TC 30/SC 5 |
|
Measurement of fluid flow in closed conduits — Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements) — Amendment 1: Guidelines for gas measurement
|
95.99 | ISO/TC 30/SC 5 |
|
Measurement of fluid flow in closed conduits — Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements)
|
90.93 | ISO/TC 30/SC 5 |
|
Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-section conduits
|
90.93 | ISO/TC 30/SC 2 |
|
Measurement of fluid flow — Methods of specifying flowmeter performance
|
90.93 | ISO/TC 30 |
|
Measurement of fluid flow in closed conduits — Ultrasonic transit-time meters for liquid
|
90.93 | ISO/TC 30/SC 5 |
|
Measurement of fluid flow in closed conduits — Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
|
90.93 | ISO/TC 30/SC 5 |
|
Measurement of fluid flow in closed conduits — Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
|
95.99 | ISO/TC 30/SC 5 |
|
Measurement of fluid flow in closed conduits — Methods using transit-time ultrasonic flowmeters
|
95.99 | ISO/TC 30/SC 5 |
|
Measurement of fluid flow by means of pressure-differential devices — Guidelines to the effect of departure from the specifications and operating conditions given in ISO 5167-1
|
95.99 | ISO/TC 30/SC 2 |
|
Measurement of fluid flow by means of pressure differential devices — Guidelines on the effect of departure from the specifications and operating conditions given in ISO 5167
|
95.99 | ISO/TC 30/SC 2 |
|
Measurement of fluid flow by means of pressure differential devices — Guidelines on the effect of departure from the specifications and operating conditions given in ISO 5167
|
60.60 | ISO/TC 30/SC 2 |
|
Measurement of conductive liquid flow in closed conduits — Flanged electromagnetic flowmeters — Overall length
|
95.99 | ISO/TC 30/SC 5 |
|
Stationary source emissions — Determination of the volume flowrate of gas streams in ducts — Automated method
|
90.93 | ISO/TC 146/SC 1 |
|
Measurement of fluid flow in closed conduits — Thermal mass flowmeters
|
95.99 | ISO/TC 30/SC 5 |
|
Measurement of fluid flow in closed conduits — Thermal mass flowmeters
|
90.93 | ISO/TC 30/SC 5 |
|
Measurement of fluid flow by means of pressure-differential devices — Guidelines for the specification of nozzles and orifice plates beyond the scope of ISO 5167-1
|
95.99 | ISO/TC 30/SC 2 |
|
Measurement of fluid flow by means of pressure-differential devices — Guidelines for the specification of nozzles and orifice plates beyond the scope of ISO 5167-1 — Technical Corrigendum 1
|
95.99 | ISO/TC 30/SC 2 |
|
Measurement of fluid flow by means of pressure-differential devices — Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167
|
95.99 | ISO/TC 30/SC 2 |
|
Measurement of fluid flow by means of pressure-differential devices — Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167
|
95.99 | ISO/TC 30/SC 2 |
|
Measurement of fluid flow by means of pressure-differential devices — Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167 series
|
60.60 | ISO/TC 30/SC 2 |
|
Measurement of fluid flow in closed conduits - Ultrasonic meters for gas — Part 1: Meters for custody transfer and allocation measurement
|
95.99 | ISO/TC 30/SC 5 |
|
Measurement of fluid flow in closed conduits — Ultrasonic meters for gas — Part 1: Meters for custody transfer and allocation measurement
|
90.93 | ISO/TC 30/SC 5 |
|
Measurement of fluid flow in closed conduits - Ultrasonic meters for gas — Part 2: Meters for industrial applications
|
90.92 | ISO/TC 30/SC 5 |
|
Measurement of fluid flow in closed conduits — Guidance for the use of electromagnetic flowmeters for conductive liquids
|
90.93 | ISO/TC 30/SC 5 |
|
Measurement of fluid flow in closed conduits — Clamp-on ultrasonic transit-time meters for liquids and gases
|
60.60 | ISO/TC 30/SC 5 |
|
Measurement of fluid flow rate in closed conduits — Radioactive tracer methods
|
60.60 | ISO/TC 30/SC 5 |
No matching records found. Please try changing the filter settings.